Go Bottom4 Tiller
 | CBanks
Join Date: Mar 2004 Posts: 2 Alabama 
|
2004-03-24 80965
I have a 4' tiller that requires some overhauling. My question is where can I find information on how the tines are supposed to be replaced....Right vs Left?
Reply to |
Quote Reply |
Add Photo4 Tiller
 | itsgottobegreen
Join Date: Oct 2003 Posts: 329 Mt. Airy, MD
 Pics
|
2004-03-24 80985
I hope you haven't taken the blades off yet. I have done this before on a friend tiller. Take one off at a time and replace it. So you put them all the right way. ....
Reply to |
Quote Reply |
Add Photo4 Tiller
| CBanks
Join Date: Mar 2004 Posts: 2 Alabama
|
2004-03-24 80995
My problem is that some of the blades have broken or already fallen off. I have bolts to replace all the existing ones that are loose. I have replacement tines, some rt, some lt, but I need a drawing or something that shows which should be right and which should be left. Any idea where to find this info? ....
Reply to |
Quote Reply |
Add Photo4 Tiller
| itsgottobegreen
Join Date: Oct 2003 Posts: 329 Mt. Airy, MD
Pics
|
2004-03-24 81023
How about some more info. Like a brand and model. Or better yet a picture. If i look at it i can tell you how to put it back together. But most tillers have 4 blades per wheel. Two left and two right. Each wheel has the blade set back 1 " further than the next wheel. Like a reel mower. So only 2 or 4 blades are applying pressure at one point. Email me with a pic at rookieff_MAVFC at hotmail.com and i send you another pic of mine. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This